I already mentioned that I want to provide the customer with the best possible product information – et voilà!
Let´s start with the MM-style pickups.
MM-style pickup 4 or 5
- Dual-coil Humbucker
- hum cancelled (rwrp wound)
- copper shielded and soldered to the ground
- two epoxy coats
- fully shielded 4-wire cable (AWG 26)
- magnets (optionally used)
- Alnico5 pole pieces, Alnico5 blades (magnetized between 60-75 mT=600-750 Gauss) or neodym magnets (alternatively)
- Ferrite (ceramic pole pieces)
- Ferrite bars with FeSi-blades
- polyurethan (180) enamelled copper wire (AWG 40 to AWG 44)
soapbar-style pickup 4 or 5
String-spacing doesn´t matter anymore due to the processed FeSi-blades
- Dual-coil Humbucker
- hum cancelled (rwrp wound)
- copper shielded and soldered to the ground
- two epoxy coats
- fully shielded 4-wire cable (AWG 26)
- magnets
- Ferrite bars with FeSi-blades
- (magnetized between 75-90 mT=600-750 Gauss) or neodym magnets (alternatively)
- polyurethan (180) enamelled copper wire (AWG 40 to AWG 44)
P-Bass split-Coil 4
As I don´t use – single magnets string-spacing doesn´t matter anymore due to the processed FeSi-blades
- Split-coil Humbucker
- hum cancelled (rwrp wound)
- copper shielded and soldered to the ground
- two epoxy coats
- fully shielded RG 174 (extremly low capacity)
- magnets
- Ferrite bars with FeSi-blades
- polyurethan (180) enamelled copper wire (AWG 40 to AWG 44)
